Format 01 · Pen
50 ml pen
Desktop plates. Precise, local application.
- 100+ prints per bottle, on a single application over a 220 × 220 mm plate
- Valve nib — put adhesive only where the part sits
- Available in all nine formulations
Find your Magigoo.
One formulation per material family. Hover a bottle for what it is rated to hold.
Magigoo Original
Commodity thermoplastics on bare glass and aluminium.
Rated for
- PLA
- ABS
- PETG
- HIPS
- TPU
Bed temperature
PLA 40–70 · ABS 90–110 · PETG 80–100 · HIPS 90–115 · TPU 30–60 °C
Release
Lifts around 30–40 °C below print temperature
Plates
The only grade rated for bare aluminium and glass
Magigoo Supergrip
Flexible and coated build plates.
Rated for
- PLA
- PETG
- ABS / ASA
- TPU
Plates
PEI, textured, satin and other flexible sheets
Application
Goes on a cold plate — no warm-up wait
Datasheet
Publication pending
Magigoo Pro PA
Polyamide, including fibre-filled grades.
Rated for
- PA6
- PA12
- PA-CF
- PA-GF
Release
Around 40 °C below print temperature
Thermal stability
Up to 130 °C
Filled grades
Rated for carbon- and glass-filled nylon
Magigoo Pro PC
Polycarbonate.
Rated for
- PC
Thermal stability
Up to 130 °C
Scope
Polycarbonate only — blends are not covered
Release
On cooling, no scraper needed
Magigoo Pro PP
Polypropylene.
Rated for
- PP
Wear gloves and eye protection. Keep off iron, copper and zinc plates.
Release
Within 30 minutes of the plate cooling
Plate limits
Not for iron, copper or zinc surfaces
Classification
Causes serious eye damage
Magigoo Pro PP-GF
Glass-reinforced polypropylene.
Rated for
- PP-GF
Wear gloves and eye protection.
Release
Heat the plate to 70–90 °C to free the part
Bed profile
100 °C first layer, then 20 °C · 20 mm brim
Classification
Causes serious eye damage
Magigoo Pro Flex
Flexible filaments.
Rated for
- TPU
- TPE
Application
Two thin coats, not one
Release
With water
Format
50 ml pen only
Magigoo Pro HT
High-temperature polymers.
Rated for
- PEEK
Bed temperature
Tested to 150 °C — the highest-rated grade
Machines
Heated-chamber and industrial platforms
Release
On cooling
Magigoo Pro Metal
Metal filament.
Rated for
- Ultrafuse 316L
Bed temperature
90–110 °C
Soak
30 minutes to 2 hours before release
Status
BASF has discontinued Ultrafuse 316L
Bigger plates. Busier print rooms.
Same chemistry, five times the bottle, and a roller instead of a nib. Magigoo Glide is built for large-format machines and print farms where a pen stops being practical.
Format 02 · Glide
Glide roller + 250 ml
Large plates and print farms. Even coverage, fast.
- Five times the volume of a 50 ml pen
- Roller covers a full plate in one pass, with no thin spots or ridges
- Keep the roller, replace the bottle
Glide comes in six formulations.
The three specialist grades stay pen-only.
- Original250 ml refill
- Supergrip250 ml refill
- Pro PA250 ml refill
- Pro PC250 ml refill
- Pro PP250 ml refill
- Pro HT250 ml refill
Not offered in Glide: Pro Flex, Pro Metal and Pro PP-GF — 50 ml pen only.
- Glide Kit — OriginalRoller, mount and a 250 ml bottle of Original. The starting point for a large plate.
- Glide Kit — SupergripThe same roller with Supergrip, for PEI, textured, satin and other flexible plates.
- Pro KitFour 50 ml pens — Original, Pro PA, Pro PC and Pro PP — for a workshop running mixed jobs.