Magigoo PPGF
Glass-filled polypropylene filaments offer excellent strength, stiffness, and thermal resistance, making them popular for demanding, industrial-grade parts. However, they also have a high tendency to warp during printing. Magigoo Pro PPGF was developed specifically to solve this — acting as a thermally activated interfacial layer between the build plate and the print, it delivers firm adhesion while the bed is hot and releases the part cleanly once it cools.
Need to buy less items?
Designed for reliable first-layer adhesion with glass-filled polypropylene filaments while allowing easy part removal after printing.
Suitable for standard polypropylene filaments, providing reliable adhesion on the print bed.
The same easy-application chemistry as every Magigoo, with one important difference: Supergrip is applied to a cold plate, not a hot one. No waiting for warm-up.
Shake the bottle for 3–5 seconds. Press the nib against the cold build plate to activate the spring valve. Spread one thin stripe back and forth — the goal is even coverage, not thickness.
No drying time needed. Print according to your filament manufacturer's recommended bed and nozzle settings — a thermally activated bond holds the part firmly throughout the job.
Let the bed cool by around 30–40 °C from your printing temperature — the part will release cleanly. For stubborn parts, reheating the bed to 60–80 °C can help loosen them.
Access datasheets, manuals, and guides
Real people, real prints
Pulled from Amazon, Reddit and our own inbox.
Quick answers, real fast.
The questions we get most often. Click any question to expand the answer.
The most common cause is bed temperature being too low. Try increasing in 5–10°C increments until you find the sweet spot. Also check:
Bed is likely too hot. Decrease the bed temperature in 5–10°C increments. Elephant's foot (where the first few layers bulge out) usually disappears once you find the right temperature.
This usually happens when the bottle was squeezed instead of pressed. The applicator is designed to release product only when the nib is pressed down. Just push it back firmly — it should snap back into place.
For future use, remember: press, don't squeeze.
We have 180+ resellers across 50+ countries. Use our distributor locator to find your nearest one — they usually ship faster than direct from Malta.
Direct shipments from Malta can take up to three weeks depending on destination. For faster delivery, check our distributor locator — resellers usually have stock locally.
Yes — Magigoo is water-based, non-pressurised, and was specifically designed for mobility. It's allowed in hand luggage.
Yes. If you're a specialist 3D printing retailer, distributor, or OEM partner, see our partner programme for application details and tier structure.
