Magigoo HT
High-temperature engineering filaments such as PEEK, PEKK, PEI and PPSU offer outstanding mechanical and chemical stability, making them highly sought after in the aerospace, automotive and medical industries. However, their high printing temperatures make them prone to warping. Magigoo Pro HT was developed specifically to solve this — delivering firm adhesion at build-plate temperatures of up to 150°C, while still releasing the part cleanly once the bed cools.
Need to buy less items?
Designed for reliable first-layer adhesion with PEEK filaments while allowing easy part removal after printing.
Suitable for PEKK filaments, providing reliable adhesion at elevated printing temperatures.
Suitable for PEI filaments, helping reduce warping on demanding high-temperature prints.
Suitable for PPSU filaments, providing reliable bed adhesion during high-temperature printing.
The same easy-application chemistry as every Magigoo — designed specifically for high-temperature engineering filaments like PEEK.
Shake the bottle for 3–5 seconds. Press the nib against the cold build plate to activate the spring valve. Spread one thin stripe back and forth — the goal is even coverage, not thickness.
No drying time needed. Print according to your filament manufacturer's recommendations — Magigoo Pro HT holds firmly at build-plate temperatures of up to 150°C.
Let the bed cool completely. The part should pop right off without tools.
Access datasheets, manuals, and guides
Real people, real prints
Pulled from Amazon, Reddit and our own inbox.
Quick answers, real fast.
The questions we get most often. Click any question to expand the answer.
High-temperature materials can shrink significantly as they cool, creating stresses that pull the part away from the build plate. Make sure the build plate is properly heated, the first layer is well calibrated and Magigoo HT is applied evenly. For larger parts, maintaining a stable printing environment is also important.
Do not force the print off while the build plate is hot. Allow the surface to cool completely so that the adhesive bond can weaken. Once cooled, gently work around the edges of the print to release it.
Yes. Magigoo HT is designed for high-temperature printing, including large engineering parts. For larger prints, consistent bed temperature, first-layer adhesion and a stable printing environment become increasingly important.
First, make sure the build plate is clean and at the correct temperature. Check the first-layer calibration and apply Magigoo HT evenly over the print area. If adhesion is still insufficient, review the recommended printing conditions for your material.
This usually happens when the bottle was squeezed instead of pressed. The applicator is designed to release product only when the nib is pressed down. Just push it back firmly — it should snap back into place.
For future use, remember: press, don't squeeze.
We have 180+ resellers across 50+ countries. Use our distributor locator to find your nearest one — they usually ship faster than direct from Malta.
Direct shipments from Malta can take up to three weeks depending on destination. For faster delivery, check our distributor locator — resellers usually have stock locally.
Yes. If you're a specialist 3D printing retailer, distributor, or OEM partner, see our partner programme for application details and tier structure.
