Magigoo Supergrip
Magigoo Supergrip was engineered specifically for flexible and polymer-based build plates — PEI, PC, satin sheets and similar engineering-grade surfaces — where standard adhesives often flake or wear out quickly. It delivers strong, long-lasting adhesion across a wide range of materials including PLA, PETG, ABS/ASA and TPU, even at lower bed temperatures, while protecting your flex plate from wear over hundreds of applications.
Need to buy less items?
Improved adhesion at colder bed temperatures, enabling PLA printing with minimal warping.
Enhanced adhesion across a wider temperature range compared to standard adhesives.
Suitable for PETG filaments, providing reliable adhesion on flexible build plates.
Suitable for flexible TPU filaments, providing reliable adhesion and easy part removal.
Suitable for HIPS filaments, providing improved first-layer adhesion.
The same easy-application chemistry as every Magigoo, with one important difference: Supergrip is applied to a cold plate, not a hot one. No waiting for warm-up.
Shake the bottle for 3–5 seconds. Press the nib against the cold build plate to activate the spring valve. Spread one thin stripe back and forth — the goal is even coverage, not thickness.
No drying time needed. Heat the bed, send the print. The thermo-responsive polymer activates as the bed reaches your filament's temperature — the first layer bonds firmly through the entire job.
Once printing is done, flex the build plate gently to release the part. If it resists, let it cool for a few minutes and try again.
Access datasheets, manuals, and guides
Real people, real prints
Pulled from Amazon, Reddit and our own inbox.
Quick answers, real fast.
The questions we get most often. Click any question to expand the answer.
Yes. Supergrip is formulated for superior spreadability and compatibility with flexible and polymer-based plates — including smooth and textured PEI, PC, engineering plates and satin sheets — without flaking or losing adhesive on removal.
Magigoo Supergrip delivers over 250 full-bed applications (235×235mm) per bottle, with multiple prints possible per application — significantly more than standard Magigoo adhesives.
The most common cause is bed temperature being too low. Try increasing in 5–10°C increments until you find the sweet spot. Also check:
Bed is likely too hot. Decrease the bed temperature in 5–10°C increments. Elephant's foot (where the first few layers bulge out) usually disappears once you find the right temperature.
This usually happens when the bottle was squeezed instead of pressed. The applicator is designed to release product only when the nib is pressed down. Just push it back firmly — it should snap back into place.
For future use, remember: press, don't squeeze.
We have 180+ resellers across 50+ countries. Use our distributor locator to find your nearest one — they usually ship faster than direct from Malta.
Direct shipments from Malta can take up to three weeks depending on destination. For faster delivery, check our distributor locator — resellers usually have stock locally.
Yes — Magigoo is water-based, non-pressurised, and was specifically designed for mobility. It's allowed in hand luggage.
Yes. If you're a specialist 3D printing retailer, distributor, or OEM partner, see our partner programme for application details and tier structure.
